Answering System36For Voice Mail service subscribersIf you subscribe to a flat-rate service packagethat includes Call Display, Call Waiting, VoiceMail, and unlimited local/regional/longdistance calls, please note the following:L To use the Voice Mail service provided byyour service provider/telephone companyrather than the unit’s answering system,turn off the answering system (page 32).L To use this unit’s answering system ratherthan the Voice Mail service provided byyour service provider/telephone company,please contact your service provider/telephone company to deactivate yourVoice Mail service.If your service provider/telephone companycannot do this:– Set this unit’s “Ring count” setting sothat this unit’s answering systemanswers calls before the Voice Mailservice of your service provider/telephone company does. It is necessaryto check the number of rings required toactivate the Voice Mail service providedby your service provider/telephonecompany before changing this setting.– Change the number of rings of the VoiceMail service so that the answeringsystem can answer the call first. To doso, contact your service provider/telephone company.Caller’s recording timeYou can change the maximum messagerecording time allowed for each caller. Thedefault setting is “3 min”.1 {MENU} (middle soft key) y3z52 {r}: Select the desired setting. s {OK}s {OFF}Selecting “Greeting only”You can select “Greeting only” which setsthe unit to announce a greeting message tocallers but not record messages.Select “Greeting only” in step 2 on“Caller’s recording time”, page 36.Note:L When you select “Greeting only”:– If you do not record your own message,the unit will play the pre-recordedgreeting-only message asking callers tocall again later.– If you use your own message, record thegreeting-only message asking callers tocall again later (page 33).TG80xxC(e).book Page 36 Friday, June 10, 2011 2:06 PM