Programming25Main menu: ! “Customer support”*15*1 KX-TG8061 series: page 3*2 If you program these settings using one of the handsets, you do not need to program the sameitem using another handset.*3 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.*4 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”.(Call Display subscribers only) To use this feature, set the date and time first (page 14).*5 KX-TG8051 series: page 3*6 Ringer volume cannot be turned off for alarm, intercom calls, and paging.*7 If you subscribe to a distinctive ring service, select a tone (tone 1 to 2). If you select a melody,you cannot distinguish lines by their ringers.*8 The ringer tone may continue to play for several seconds even if the caller has already hungup. You may either hear a dial tone or no one on the line when you answer the call.*9 The preset melodies in this product are used with permission of © 2011 Copyrights Vision Inc.*10You can set the wallpaper to display with or without date and time by pressing {CLOCK}. Thedefault setting is with date and time displayed.*11You can set the handset display backlight while on charge.– “On”: Backlight is on (dimmed).– “Off”: Backlight turns off after 10 seconds of charging.Set tel line Set dial mode*2 1: Pulse 2: <Tone> #120 15Set flash time*2, *14 0: 900 ms1: <700 ms>2: 600 ms3: 400 ms4: 300 ms5: 250 ms*: 200 ms#: 160 ms6: 110 ms7: 100 ms8: 90 ms9: 80 ms#121 18Privacy mode*2 – 1: On 0: <Off> #194 19Registration Register handset – #130 29Deregistration*3 – #131 29Change language Display 1: <English>2: Français#110 14Voice prompt*2 1: <English>2: Français#112 15Operation Code +Displaying customer support Web address. #680 –Sub-menu 1 Sub-menu 2 Setting Code +TG80xxC(e).book Page 25 Friday, June 10, 2011 2:06 PM