Programming27Special programmingAlarmAn alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset.Important:L Set the date and time beforehand (page14).1 {MENU} (middle soft key) y72z2 {r}: Select the desired alarm option. s{OK}3 Enter the desired month and date. s{OK}4 Set the desired time.5 {AM/PM}: Select “AM” or “PM”. s {OK}6 {r}: Select the desired alarm tone. s{OK}L We recommend selecting a differentringer tone from the one used foroutside calls.7 {OK} s {OFF}L When the alarm is set, z is displayed.Note:L To stop the alarm, press {OFF} or place thehandset on the base unit or charger.L When the handset is in use, the alarm willnot sound until the handset is in standbymode.Night modeNight mode allows you to select a period oftime during which the handset will not ring foroutside calls. This feature is useful for timeperiods when you do not want to be disturbed,for example, while sleeping. Night mode canbe set for each handset.Important:L Set the date and time beforehand (page14).L We recommend turning the base unit ringeroff (page 18) in addition to turning the nightmode on. (KX-TG8061 series: page 3)L If you have set the alarm, the alarm soundseven if the night mode is turned on.Turning night mode on/off1 {MENU} (middle soft key) y2382 {r}: Select the desired setting. s {OK}L If you select “Off”, press {OFF} toexit.3 Enter the desired hour and minute youwish to start this feature.4 {AM/PM}: Select “AM” or “PM”. s {OK}5 Enter the desired hour and minute youwish to end this feature.6 {AM/PM}: Select “AM” or “PM”.7 {OK} s {OFF}L When the night mode is set, f isdisplayed.Changing the start and end time1 {MENU} (middle soft key) y2372 Continue from step 3, “Turning nightmode on/off”, page 27.Changing the handset nameEach handset can be given a customizedname (“Bob”, “Kitchen”, etc.). This is usefulwhen you make intercom calls betweenhandsets. You can also select whether or notthe handset name is displayed in standbymode. The default setting is “No”. If you select“Yes” without entering any handset name,“Handset 1” to “Handset 6” is displayed.1 {MENU} (middle soft key) y1z42 Enter the desired name (max. 10characters; see the character table, page20).L If not required, go to step 3.3 {OK}Off Turns alarm off. Go to step 7.Once An alarm sounds once at theset time.Daily An alarm sounds daily at theset time. Go to step 4.TG80xxC(e).book Page 27 Friday, June 10, 2011 2:06 PM