Panasonic KX-TG8052C Operating Instructions Manual

Programming284 {r}: Select the desired setting. s {OK} 2times5 {OFF}Call block (Call Displaysubscribers only)This feature allows the unit to reject callswhen:– the unit receives a call from a phonenumber stored in the call block list asunwanted (“Storing unwanted callers”, page28).– the unit receives a call without phonenumber (“Blocking incoming calls withoutphone number”, page 28).When a call is received, the unit rings for ashort time while the caller is being identified. Ifthe phone number matches an entry in the callblock list, the unit sends out a busy tone to thecaller, and then disconnects the call.Important:L When the unit receives a call from a numberthat is stored in the call block list or a callwithout a recognized phone number, thecall is logged in the caller list (page 30) with$ after the call is disconnected.Storing unwanted callersYou can store up to 30 phone numbers in thecall block list.Important:L We recommend storing 10 digits (includingan area code). If only 7 digits are stored, allnumbers that have the same last 7 digits willbe blocked.■ From the caller list:1 {3} CID2 {r}: Select the entry to be blocked. s{OK}L To edit the number, press {EDIT}repeatedly until the phone numberis shown in the 10-digit format.3 {SAVE}4 {r}: “Call block” s {OK}5 {r}: “Yes” s {OK}6 Edit the phone number if necessary(24 digits max.).7 {OK} s {OFF}■ By entering phone numbers:1 {MENU} (middle soft key) y217s {ADD}2 Enter the phone number (24 digitsmax.).L To erase a digit, press {CLEAR}.3 {OK} s {OFF}Blocking incoming calls withoutphone numberYou can reject a call when no phone number isprovided, such as a call just showing“Unavailable Name & No.”.1 {MENU} (middle soft key) y24z2 {r}: Select the desired setting. s {OK}s {OFF}Viewing/editing/erasing call blocknumbers1 {MENU} (middle soft key) y2172 {r}: Select the desired entry.L To exit, press {OFF}.3 To edit a number:{EDIT} s Edit the phone number. s{OK} s {OFF}To erase a number:{ERASE} s {r}: “Yes” s {OK} s{OFF}Note:L When editing, press the desired dial key toadd, {CLEAR} to erase.L When viewing, “Block w/o num” isdisplayed if the blocking incoming callswithout phone number feature is turned on.To turn the feature off: {ERASE} s {V} s{OK} s {OFF}TG80xxC(e).book Page 28 Friday, June 10, 2011 2:06 PM