Panasonic KX-TG8611PD Operating Instructions Manual

Making/Answering Calls15Making calls1 Lift the handset and dial the phonenumber.L To correct a digit, press ^.2 Press {C} or ].3 When you finish talking, press {ic} orplace the handset on the charger.Using the speakerphone1 Dial the phone number and press {s}.L Speak alternately with the other party.2 When you finish talking, press {ic}.Megjegyzés:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{s}/{C}.Adjusting the receiver or speaker volumePress {^} or {V} repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are storedin the redial list (each 24 digits max.).1 j (right soft key) or {>} (R)2 {r}: Select the desired phone number.3 {C}/{s}L If {s} is pressed and the other party’sline is engaged, the unit automaticallyredials multiple times. While thehandset is waiting to redial, the ringerindicator flashes. To cancel, press{ic}.Erasing a number in the redial list1 j (right soft key) or {>} (R)2 {r}: Select the desired phone number.s W3 {r}: “IGEN” s M s {ic}Pause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (19. oldal).Példa: If you need to dial the line accessnumber “0” when making outside calls witha PBX:1 ) s l2 Dial the phone number. s {C}Megjegyzés:L A 3 second pause is inserted each timel is pressed. Repeat as needed tocreate longer pauses.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press {C} or {s}when the unit rings.L You can also answer the call bypressing any dial key from ) to 9,*, or (. (Any key answer feature)2 When you finish talking, press {ic} orplace the handset on the charger.Auto talkYou can answer calls simply by lifting thehandset off the charger. You do not need topress {C}. To turn this feature on, see 25.oldal.Adjusting the handset ringer volume■ While the handset is ringing for anincoming call:Press {^} or {V} repeatedly to select thedesired volume.■ Programming the volume beforehand:1 1 (middle soft key) (16)2 {r}: Select the desired volume.3 M s {ic}Temporary handset ringer offWhile the handset is ringing for a call, youcan turn the ringer off temporarily by pressingL.TG8611PD(e-hg).book Page 15 Friday, March 18, 2011 1:31 PM