Panasonic KX-TG8611PD Operating Instructions Manual

Programming323 {r}: “BE” s M4 {r}: Select the outside line. s ~5 1 s {r}: “Szerkesztés” s M6 Edit the name if necessary (16characters max.; 45. oldal). s M7 Edit the phone number if necessary (24digits max.). s M 2 timesErasing an outside monitoring number1 Press 1 on the handset beingmonitored.2 {r}: “Be/Ki” s M3 {r}: “BE” s M4 {r}: Select the outside line. s ~5 1 s {r}: “Törlés” s M6 {r}: “IGEN” s MBaby monitor sensitivityYou can adjust the sensitivity of the babymonitor. Increase or decrease the sensitivityto adjust the sound level needed to triggerthe baby monitor feature.L This feature cannot be set duringa monitoring call.1 Press 1 on the handset beingmonitored.2 {r}: “Érzékenység” s M3 Press {^} or {V} to select the desiredsetting. s M s {ic}Megjegyzés:L When the baby monitor is activated, youcannot access the direct commands usingthe monitored handset. Before setting thebaby monitor feature, you can use directcommands to adjust baby monitorsensitivity (24. oldal).Answering the baby monitor■ When monitoring with a handset:Press {C} to answer calls.If you want to respond from the monitoringhandset, press 1.L The monitoring handset will answercalls automatically when the autointercom feature is set to “BE” (41.oldal).Megjegyzés:L If you receive an outside call whencommunicating with the monitoredhandset, you hear 2 tones. To answerthe call, press {ic}, then press {C}.■ When monitoring from an outside line:To answer a call, follow the operation foryour phone.If you want to respond from the monitoringhandset, press (1 using tone dialling.You can turn off the baby monitor featureby pressing ().Megjegyzés:L 2 minutes after the monitored handsetstarts a call, communication betweenthe monitored handset and monitoringphone line is turned off automatically.Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered toa single base unit.Fontos:L The additional handset modelrecommended for use with this unit isnoted on 3. oldal. If another handset modelis used, certain operations may not beavailable.Additional base unitsHandsets can be registered to up to 4 baseunits, allowing you to add additional baseunits and extend the area in which yourhandset(s) can be used. If a handset movesout of range of its base unit when“Automata” is selected on base unit (33.oldal), it looks for another base unit to makeor receive calls. A base unit and the handsetsit communicates with is called a “radio cell”.TG8611PD(e-hg).book Page 32 Friday, March 18, 2011 1:31 PM