Intercom/Locator41IntercomIntercom calls can be made betweenhandsets in the same radio cell.Megjegyzés:L If you receive an outside call while talkingon the intercom, you hear 2 tones. Toanswer the call, press {ic}, then press{C}.L When paging the handset, the pagedhandset beeps for 1 minute.Making an intercom call1 1 (middle soft key) s 42 {r}: Select the desired unit. s ML To stop paging, press {ic}.3 When you finish talking, press {ic}.Answering an intercom call1 Press {C} to answer the page.2 When you finish talking, press {ic}.Turning auto intercom on/offThis feature allows the handset to answerintercom calls automatically when it is called.You do not need to press {C}. When thisfeature is set to “BE”, the monitoring handsetfor the baby monitor feature (31. oldal) willalso answer baby monitor calls automatically.The default setting is “KI”.1 1 (middle soft key) (2732 {r}: Select the desired setting. s Ms {ic}Handset locatorYou can locate a misplaced handset bypaging it.1 Base unit: Press {x}.L All registered handsets beep for 1minute.2 To stop paging:Base unit: Press {x}.Handset: Press {ic}.Transferring calls,conference callsOutside calls can be transferred between 2handsets in the same radio cell.2 handsets in the same radio cell can havea conference call with an outside party.1 During an outside call, press 4 to putthe call on hold.2 {r}: Select the desired unit. s M3 Wait for the paged party to answer.L If the paged party does not answer,press ^ to return to the outside call.4 To complete the transfer:Press {ic}.L The outside call is being routed to thedestination unit.To establish a conference call:1 s {r}: “Konferencia” s ML To leave the conference, press{ic}. The other 2 parties cancontinue the conversation.L To put the outside call on hold: 1s {r}: “Tartás” s MTo resume the conference:1 s {r}: “Konferencia” sMMegjegyzés:L If you want to return to the outside callafter the paged party answers, press W.Answering a transferred callPress {C} to answer the page.TG8611PD(e-hg).book Page 41 Friday, March 18, 2011 1:31 PM