Panasonic KX-TG8611PD Operating Instructions Manual

Useful Information47Error messagesThe displays with abbreviation are rephrased with [ ].Display message Cause/solutionNincs áram[Base no power]orNincs csatlak.Csatlak. újra ahál. adaptert.[No link. Reconnect ACadaptor.]L The handset has lost communication with the base unit.Move closer to the base unit and try again.L Unplug the base unit’s AC adaptor to reset the unit.Reconnect the adaptor and try again.L The handset’s registration may have been cancelled. Re-register the handset (33. oldal).Telefonvonalellenőrzése[Check phone line]L The supplied telephone line cord has not been connected yetor not connected properly. Check the connections (8. oldal).sikertelen[Failed]L Phonebook copy failed (19. oldal). Confirm the other handset(the receiver) is in standby mode and try again.Nincs kész[Incomplete]L The receiver’s phonebook memory is full. Erase theunwanted phonebook entries from the other handset (thereceiver) and try again.Érvényt. szám[Invalid number]L You tried to send an SMS message to a phone numbersaved in the phonebook, caller list, or redial list that is over20 digits long.Mem. megtelt[Memory full]L The phonebook memory is full. Erase unwanted entries (19.oldal).L The call barred list memory is full. Erase unwanted entries(29. oldal).L The schedule alarm memory is full. Erase unwanted entries(30. oldal).L The maximum number of base units (4) is already registeredto the handset. Cancel unused base unit registrations fromthe handset (33. oldal).Használjonújratölthetőakkumulátort.[Use rechargeablebattery.]L A wrong type of battery such as Alkaline or Manganese wasinserted. Use only the rechargeable Ni-MH batteries notedon 3, 5. oldal.Fizessen elő ahívófélazonosításra.[You must first subscribeto Caller ID.]L You must subscribe to a Caller ID service. Once you receivecaller information after subscribing to a Caller ID service, thismessage will not be displayed.TG8611PD(e-hg).book Page 47 Friday, March 18, 2011 1:31 PM