Panasonic KX-TS4300 Operating Instructions Manual

Contents

Panasonic KX-TS4300 Operating Instructions Manual Manual pdf 26 page image

Making/Answering Calls26 For assistance, please visit http://www.panasonic.com/phonehelpErasing a number in the redial listImportant:L Make sure that the unit is in standbymode.1 Press {REDIAL/PAUSE}.2 Press {V} or {^} to select thedesired number, then press{ERASE}.3 Select “Yes?”, then press {ERASE}or {MENU/SET}.L To cancel, select “No?”, then press{MENU/SET}.4 Press {REDIAL/PAUSE} to return tostandby mode.Note:L To return to the previous menu, press{<}.PAUSE button (for PBX/long distanceservice users)A pause is sometimes required whenmaking calls using a PBX or longdistance service. When storing a callingcard access number and/or PIN in thephonebook, a pause is also needed (see“Chain dial” on page 34).For example, if you need to dial the lineaccess number “9” when making outsidecalls with a PBX:1 Lift the handset or press{SP-PHONE} or a line button.2 Press {9}, then press{REDIAL/PAUSE}.3 Dial the phone number.Note:L A 3.5 second pause is inserted eachtime {REDIAL/PAUSE} is pressed.Press repeatedly to insert longerpauses.Answering callsWhen a call is being received, the unitrings and the called line indicator flashesrapidly.Using the handset1 Lift the handset.2 When you finish talking, place thehandset on the cradle.Using the speakerphone1 Press {SP-PHONE}.2 Speak into the MIC.3 When you finish talking, press{SP-PHONE}.Note:L In step 1, you can also answer the callby pressing the flashing line button. Besure that the handsfree mode is set to“Speakerphone” (see “Handsfreemode” on page 51).Adjusting the ringer volume (4 levels)Press {-} or {+} repeatedly when instandby mode.Turning ringer on/offTurn the ringer on/off for each line.Important:L Make sure that the unit is in standbymode.1 Press {MENU/SET}.2 Select “Advanced Setup”, thenpress {MENU/SET}.3215555EraseYes?