Answering systemFor assistance, please visit http://www.panasonic.com/phonehelp 61Erasing a message1 Press {ERASE} during playback.2 Select “Yes?”, then press {ERASE}or {MENU/SET}.L To cancel, select “No?”, then press{MENU/SET}.Erasing all messagesImportant:L Make sure that the unit is in standbymode.1 Press {REC/ERASE ALL}.2 Select “Erase All MSG”, thenpress {MENU/SET}.3 Select “Yes?”, then press {ERASE}or {MENU/SET}.L To cancel, select “No?”, then press{MENU/SET}.4 Press {REC/ERASE ALL} to returnto standby mode.Note:L To return to the previous menu, press{<}.Voice memoRecording a voice memoYou can use the unit to leave a voicememo (voice message) for yourself orsomeone else. Voice memos can beplayed back later with the sameoperation used to play back answeringsystem messages.Important:L Make sure that the unit is in standbymode.1 Press {REC/ERASE ALL}.2 Select “Record Memo”, then press{MENU/SET}.3 After the unit beeps, speak clearlyabout 20 cm (8 inches) away fromthe MIC.4 To stop recording, press{MENU/SET}.5 Press {REC/ERASE ALL} to returnto standby mode.Note:L To return to the previous menu, press{<}.L The recording time of the voice memo(voice message) doesn’t havelimitation.L If there is no sound recorded for awhile, recording mode will end.TAD Operation➔Erase All MSGTAD Ans-OGM[V/^]:ScrollErase All MSGAll Message:19Erase AllYes?TAD Operation➔Record MemoErase All MSG[V/^]:Scroll