Answering systemFor assistance, please visit http://www.panasonic.com/phonehelp 633 Enter the remote commands (see“Remote commands” on page 63).4 When finished, hang up.Remote commandsYou can press dial keys to accesscertain answering system functions.*1 If pressed within the first 3 seconds ofa message, the previous message isplayed.*2 During playback of the greeting, youcan record a new greeting by pressing{4}.Note:L If the phone is being accessedremotely, it will not respond to anykeys.L Remote operation will end by pausingfor over 20 seconds during remoteoperation.Toll saverIf the Toll saver feature is turned on, theunit answers within about 10 secondswhen new messages have beenrecorded, and after over 10 secondswhen there are no new messagespresent. For example, if you call thisphone from an outside line and thephone rings for over 10 seconds, thereare no new messages present. You canthen hang up without being charged forthe call.Important:L Make sure that the answering systemis turned on (see “Turning theanswering system on/off ” on page 57)and the Automated Attendant Systemis turned off (see “Turning AutomatedAttendant System on/off ” on page 53).Turning Toll Saver on/offImportant:L Make sure that the unit is in standbymode.1 Press {MENU/SET}.2 Select “AA/TAD Setup”, then press{MENU/SET}.3 Select “Toll Saver”, then press{MENU/SET}.Key Remote command{1} Repeat message (duringplayback)*1{2} Play new messages{2}{#} Play all messages{3} Skip message (duringplayback){4} Record a memo{5} Stop recording/playback{6} Play answering systemgreeting *2{7} Play Automated AttendantSystem day timegreeting *2{8} Play Automated AttendantSystem night timegreeting *2{9} Play Automated AttendantSystem Auxiliarygreeting *2{0} Turn answering systemon/off{*}{*} Erase currently playingmessage{*}{#} Erase all messages➔Toll SaverRemote CodeMessage Length[V/^]:Scroll