Panasonic KX-TS4300 Operating Instructions Manual

Contents

Panasonic KX-TS4300 Operating Instructions Manual Manual pdf 60 page image

Answering system60 For assistance, please visit http://www.panasonic.com/phonehelp3 Select “Play”, then press{MENU/SET}.4 Press {ERASE} while your greetingmessage is playing.5 Select “Yes?”, then press {ERASE}or {MENU/SET}.L To cancel, select “No?”, then press{MENU/SET}.6 Press {REC/ERASE ALL} to returnto standby mode.Note:L To return to the previous menu, press{<}.Pre-recorded greetingmessageIf you erase (or do not record) your owngreeting message, the unit plays apre-recorded greeting message forcallers asking them to leave a message.If the message length is set to“Greeting Only” (see “Caller’smessage length” on page 64), incomingmessages are not recorded and the unitplays a different pre-recorded greetingmessage: (“Hello, we are not availablenow. Thank you for calling.”). The callwill end after the message has played.To play back the pre-recorded greetingmessage, see “Playing back the greetingmessage” on page 59.Listening to messagesWhen new messages have beenrecorded, the MESSAGE indicatorflashes. When you have listened to allnew messages, the MESSAGE indicatorwill switch from flashing to lit.Important:L Make sure that the unit is in standbymode.1 Press {MESSAGE}.L The unit plays new messages.L When you have no new messages,the unit plays back all messages.2 To stop playback, press{MESSAGE} again.Note:L When you have erased all messages,the MESSAGE indicator goes out.Adjusting the speaker volumePress {-} or {+} repeatedly whilelistening to a message.Repeating a messagePress {<} during playback.L If pressed within the first 3 seconds ofa message, the previous message isplayed.Skipping a messagePress {>} during playback.Pausing a messagePress {MENU/SET} during playback.L To resume playback, press{MENU/SET} again while “Play” isdisplayed.L To stop playback completely, press{MESSAGE} or select “Exit”, thenpress {MENU/SET} again.TAD Ans-OGMTAD Ans-OGMPlayingErase[SET]:PlayYes?