Panasonic KX-TS4300 Operating Instructions Manual

Contents

Panasonic KX-TS4300 Operating Instructions Manual Manual pdf 57 page image

Answering systemFor assistance, please visit http://www.panasonic.com/phonehelp 57Answering systemImportant:L When callers leave messages, the unitrecords the day and time of eachmessage. Make sure the date andtime have been correctly set (see“Date and time” on page 24).Memory capacityThe total recording capacity (includingyour greeting message, callermessages, voice memo, and telephoneconversation) is about 60 minutes. Amaximum of 99 messages (including agreeting message) can be recorded.L If the message memory becomes full,“Memory Full” will blink, recordingwill stop, and the pre-recordedgreeting message (“Hello, we are notavailable now. Thank you for calling.Memory full.”) will be announced tocallers. Erase unnecessary messages(see “Erasing a message” onpage 61).Turning the answeringsystem on/offPress {ANSWER ON} to turn on/off theanswering system. (The default settingis on.)L When the answering system is turnedon, the ANSWER ON indicator lights.L When the answering system is turnedoff, the ANSWER ON indicator goesout.TAD answer delayThis setting changes the amount of timethe phone waits before playing thegreeting message (14 - 40 Seconds).After the selected amount of timepasses, the phone plays the greetingmessage. The default setting is “20Seconds”.Important:L Make sure that the unit is in standbymode.1 Press {MENU/SET}.2 Select “AA/TAD Setup”, then press{MENU/SET}.3 Select “TAD Ans. Delay”, thenpress {MENU/SET}.4 Select the desired setting, then press{MENU/SET}.5 Press and hold {MENU/SET} toreturn to standby mode.Note:L To return to the previous menu, press{<}.03:45P 02/23 MONEXT 11CID:100/198 MSGWMemory Full 1 34➔TAD Ans. DelayToll SaverRemote Code[V/^]:ScrollTAD Ans. Delay=20 Seconds[SET]:Save[V/^]:Change