4-8 System AdministratorQuick Setup provides a quick way of system setup. You must initially set thefollowing programming items to start the VPS operation.1. PBX Type2. Extension numbers of VPS ports3. Extension numbers for mailboxes4. Creating Mailboxes5. Port Service Setting6. Password Setting7. Date and Time Setting8. Activating the Quick SetupDepending on your PBX type, some steps can be skipped as shown below.Starting the Quick SetupAt the System Administration Top Menu, type “5” and press [RETURN]. (Onlyavailable in the VT100 mode)System Administration Top Menu → 54.3.1 Quick SetupRequired Procedures1 2 3 4 5 6 71 3 4 5 6 71 4 5 6 7PBX TypeKX-T308/T616KX-T1232/T96/T336, non-Panasonic systemKX-TD816/1232Quick Setup Utility for connection to Panasonic KX-T series telephone systemsThis utility provides a quick way of programing the Voice Processing Systemto operate in a standard automated attendant or voice mail configuration whenconnected to a Panasonic KX-T series telephone system. The system will promptyou to enter, modify or confirm settings based upon which PBX type you select.By entering the appropriate information in the following screens, the systemsets PBX integration parameters, identifies the extension numbers connectedto it, creates default mailboxes, sets its ports to handle callers withautomated attendant or voice mail service, sets system passwords and setsthe time and date. Finally, it confirms that you want to activate the systembased on the information you entered, modified or confirmed.To proceed, press Enter. To exit and cancel Quick Setup now, press \ .Note: Utility Command “QSET” is also available for starting the Quick Setup.See page 7-14.
