7-8 Maintenance7.1 Utility CommandsThe memory which is required for the data terminal to be used for this feature is asfollows:1. Program — approximately 2 MBytes2. Parameters — approximately 3 MBytes3. System Prompts — approximately 23 MBytes4. User Prompts–15. User Prompts–26. Custom Service Menu7. Personal Greeting8. Company Greeting1 Type “SAVE”, then press [RETURN].2 Select item to be backed up, then press [RETURN].3 Press [RETURN].4 Set the data terminal to the receiving (Answer) mode (Xmodem). Then specifythe backup filename.The specified data will be transmitted to the data terminal.Notes: • The data terminal used must be equipped with communicationssoftware that supports the Xmodem file transfer protocol.• You can cancel this command by pressing ‘\’ before entering thereceiving mode. Once you have selected the receiving mode, usethe cancel command of the communication software which you use.(e.g., “quit” for the Crosstalk)depending upon the length of therecorded messages.$ SAVEVPS Disk Data Save (VPS → PC : Xmodem)1: Program2: Parameters3: System Prompts4: User Prompts–15: User Prompts–26: Custom Service Menu7: Personal Greeting8: Company GreetingSelect No. :=To start press ‘RETURN’Start - - - - - Save !!
