System Administrator 4-774.5.6 Hardware SettingsValue Range(default)Stop Bit Length 1. 1 bit2. 2 bits(1)Specifies the number of bits used to signify theend of the byte.DataTerminal orPrinterConnectionp.2-224.5.6.2 Port SettingThe VPS must be connected to a PBX telephone line port before system start up.System Administration Top Menu → 1 → 6 → 2Parameter Description/Function ReferencePort Setting MenuSystem Administration Top Menu → 1 → 6 → 2 → Port No. (1-12)Program – Hardware – Port Setting MenuPort Number [1]Flash Time -------------------------------------------------------------- : 100CPC Signal ------------------------------------------------------------- : 6.5Disconnect Time ------------------------------------------------------ : 2Dial Mode --------------------------------------------------------------- : DTMF1:100 msec 2:300 msec 3:600 msec 4:900 msecProgram – Hardware Menu1. RS-232C2. Port Setting3. PBX Interface ParametersEnter the Port Number (1-12) =Current Card ConfigurationSLOT1:PORT1 PORT2 PORT3 PORT4SLOT2:PORT5 PORT6 PORT7 PORT8SLOT3:Note: You can assign parameters for all 12 ports. However, the locationof currently valid ports (Max.8) is displayed under "Current CardConfiguration" on the screen above.
