Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

Panasonic NV-GS320 Operating Instructions Manual Manual pdf 102 page image

Record mode102VQT1A48Recording still pictures onto a card(Photoshot)≥Set to Card Recording Mode.1 Press the [ ] button halfway in order toadjust focusing. (For auto focusing only)≥If you set [O.I.S.] to [ON], then the imagestabilizer function will be more effective.([ (MEGA OIS)] will be indicated.)≥The iris/gain value is fixed and this camerafocuses on the subject automatically.1 Shutter chance mark± (The white lamp flashes.):Focusing¥ (The green lamp lights up.):When in focusNo mark: When focusing is unsuccessful≥The shutter chance mark is indicated asfollows when the [ ] button is not pressedhalfway. Please use it as a guide forrecording.¥ (The green lamp lights up.):When in focus and a goodpicture can be recorded± (The white lamp lights up.):Almost in focus2 Focus area2 Press the [ ] button fully.ª To record still pictures clearly≥When zooming in on the subject with amagnification of 4k or higher, it is difficult toreduce the slight shaking from holding themovie camera by hand. We recommenddecreasing the zoom magnification andapproaching the subject when recording.≥When recording still pictures, hold the moviecamera firmly with your hands and keep yourarms stationary at your side so as not to shakethe movie camera.≥You can record stable pictures without shakingby using a tripod and the remote control.≥For the number of still pictures to be recordedon a card, refer to -151-.≥The moving picture and sound cannot berecorded.≥While data are recorded on a card, do notoperate the mode dial.≥When the access lamp is lit, do not insert orremove a card.≥Another product may degrade or not play backdata recorded on this camera.≥If set [PICT.QUALITY] >> [ ], mosaic-patternnoise may appear on a playback imagedepending on the picture content.≥When the [PICTURE SIZE] is set to other than[ ] or [ ], the mega pixel recording modeis set.≥It is not possible to press the [PHOTO SHOT]button on the remote control halfway.ª On-screen display in the cardrecording mode1) Still picture size2) Card indication (-138-)3) Number of recordable still pictures(When no picture can be recorded, thisindication will flash in red.)4) Quality of still picturesMEGA121)3)4)2.4 2)