Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

Panasonic NV-GS320 Operating Instructions Manual Manual pdf 83 page image

Before using83VQT1A48(32) Tripod receptacleThis is a hole for attaching the camera to optionaltripod/VW-CT45E. (Please carefully read theoperating instructions for how to attach the tripodto the camera.)≥You cannot open the card slot cover when thetripod is used. Insert the card first and thenattach the tripod.(33) Lens hoodIn order to remove the lens hood, rotate itcounterclockwise 1. In order to fit it, put into slot2, and then rotate it clockwise.≥Fit the MC protector or the ND filter of the FilterKit (VW-LF37WE; optional) in front of the lenshood. Do not fit the other accessories on thehood. (Except for the lens cap)(Refer to the operating instructions for the FilterKit.)≥When fitting the tele conversion lens(VW-LT3714ME; optional) or the wideconversion lens (VW-LW3707M3E; optional),first remove the lens hood.(Refer to the operating instructions for the teleconversion lens or the wide conversion lens.)≥When 2 lens accessories, such as the ND filterand tele conversion lens, are fitted and the[W/T] lever is pressed toward the [W] side, the 4corners of an image will be darkened.(Vignetting)Fitting the lens capFit the lens cap to protect the surface of the lens.≥The lens cap and the lens cap cord comepre-attached to the grip belt.≥When not using the lens cap, pull the lens capcord in the direction of the arrow. 1≥When you are not recording, be sure to coverthe lens with the lens cap for protection. 2≥When you remove the lens cap, press the knobsfirmly.The grip beltAdjust the belt length so it fits your hand.1 Adjust the belt length and the pad position.1 Flip the belt.2 Adjust the length.3 Fix the belt.(32)1 2(33)21123