Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

Panasonic NV-GS320 Operating Instructions Manual Manual pdf 144 page image

Others144VQT1A482: “PUSH THE RESET SWITCH” is displayed.• An irregularity in the movie camera has beenautomatically detected. Remove the cassetteor the card for data protection and then pressthe [RESET] button with the boss A. Themovie camera will be activated.• If you do not press the [RESET] button, thepower to the movie camera is turned offautomatically about 1 minute later.• Even after you press the [RESET] button, theindication may still appear repeatedly. If so, themovie camera needs repair. Detach the powerconnected, and consult the dealer who youpurchased the movie camera from. Do notattempt to repair the appliance by yourself.3: Even if connected by the USB cable, themovie camera is not recognized by the PC.• Is the USB driver installed? -127-4: When the USB cable is disconnected, anerror message will appear on PC.• To disconnect the USB cable safely, double-click the [ ] icon in the task tray and follow theinstructions on the screen.5: The movie camera malfunctions on editing,dubbing from digital video equipment, orusing “MotionDV STUDIO 5.6E LE for DV”or “SweetMovieLife”.• If a tape is recorded in multiple modes such asSP and LP (recording mode), 12bit and 16bit(sound recording mode), 4:3 and wide,recorded and unrecorded parts, the moviecamera may malfunction at a point where themode switches. When you edit, do not record inmultiple modes.6: The warning/alarm indication [°] appearswhen the camera is operated in the WEBcamera mode.• Did you press the menu button or the recordingstart/stop button? You cannot use the menu orrecord onto the tape/card in the WEB cameramode.• Is the setting for the remote control correct?• Did you attempt to play a tape without insertingit? Insert a tape.• Did you attempt to play a tape with copyrightprotection (copy guard)? Pictures of the tapewith copyright protection (copy guard) cannotbe displayed on the PC. (The audio of the tapecan be played.)• Is the USB driver installed? -127-Cautions for Useª About condensationIf you turn the movie camera on whencondensation occurs on the head or the tape,condensation Indication [3] (yellow or red) isdisplayed on the viewfinder or the LCD monitorand the messages [3DEW DETECT] or[3EJECT TAPE] (only when the tape isinserted) appear. If so, follow the procedurebelow.1 Remove the tape if it is inserted.≥It takes about 20 seconds to open thecassette holder. This is not a malfunction.2 Leave the movie camera with the cassettecover closed to cool or warm it to theambient temperature.≥The Status indicator blinks for about1 minute and then the movie cameraautomatically turns off. Leave it for about 1.5to 2 hours.3 Turn the movie camera on again, set it tothe Tape Recording/Playback Mode andthen check if the condensation indicationdisappears.Especially in cold areas, moisture may be frozen.If so, it may take more time before thecondensation indication disappears.Watch for condensation even before thecondensation Indication is displayed.≥If the indicator of the condensation does notdisplay on the LCD monitor and/or viewfinderand you notice condensation on the lens or themain unit, do not open the cassette coverotherwise condensation may be formed on theheads or the cassette tape.When the lens is fogged:Set the [OFF/ON] switch to [OFF] and leave themovie camera in this condition for about 1 hour.ARESET