Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

Panasonic NV-GS320 Operating Instructions Manual Manual pdf 84 page image

Before using84VQT1A48Power supplyª Charging the batteryWhen this product is purchased, the battery is notcharged. Charge the battery before using thisproduct.≥Battery charging time (-85-)≥We recommend using Panasonic batteries.(-81-)≥If you use other batteries, we cannot guaranteethe quality of this product.≥If the DC input lead is connected to the ACadaptor, then the battery will not get charged.Remove the DC input lead from the AC adaptor.1 Connect the AC mains lead to the ACadaptor and the AC mains socket.2 Put the battery on the battery mount byaligning the mark, and then securely plug itin.ª Charging lampLights up:ChargingGoes off: Charging completedFlashing: The battery is over discharged(discharged excessively). In a while,the lamp will light up and normalcharging will start.When the battery temperature isexcessively high or low, the [CHARGE]lamp flashes and the charging time willbe longer than normal.ª Connecting to the AC outletThe unit is in the standby condition when the ACadaptor is connected. The primary circuit isalways “live” as long as the AC adaptor isconnected to an electrical outlet.1 Connect the AC mains lead to the ACadaptor and the AC mains socket.2 Connect the DC input lead to the ACadaptor.3 Connect the DC input lead to this product.≥The output plug of the AC mains lead is notcompletely connected to the AC adaptorsocket. As shown in 1, there is a gap.≥Do not use the power cord for otherequipment since the power cord is exclusivelydesigned for the movie camera. Or do not usethe power cord of other equipment for themovie camera.1