Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

Panasonic NV-GS320 Operating Instructions Manual Manual pdf 137 page image

Menu137VQT1A48Menus related to taking picturesª [DATE/TIME]This switches between date and time indications.≥The movie camera automatically records thedate and time of picture taking on the tape/card.≥You can also show or change the date/timeindication by repeatedly pressing the[DATE/TIME] button on the remote control.ª [AUDIO REC]Switches the audio (PCM audio) recordingsystems.[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.(The original audio signals can be keptafter the other audio signals are dubbed.)[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.Audio can be recorded in higher quality.(If audio signals are dubbed, then theoriginal audio signals will be erased.)ª [DISPLAY]Set to [ON] and the display mode can be switchedto all functions. Set to [OFF] and it can beswitched to minimum display.ª [BEEP SOUND]Set to [ON] and confirmation/alarm beeps areissued as follows.1 Beep≥When you start recording≥When you turn on the power≥When the unit goes from quick start standbymode to recording pause2 Beeps≥When you pause recording≥When you turn off the power≥When the unit goes into quick start standby mode2 Beeps for 4 times≥When a cassette with its erasure prevention tabset to [SAVE] is inserted, condensation occurs(-144-), and at other times. Check the sentencedisplayed on the screen. (-139-)ª [POWER SAVE][OFF]: When about 5 minutes passedwithout any operation, the standbymode automatically will be set. Inthe standby mode, [;] blinks and ittakes time more than usual to startrecording after you press therecording start/stop button.[5 MINUTES]:When about 5 minutes passedwithout any operation, the moviecamera automatically turns off toprotect the tape or to prevent thebattery from running down. Whenyou use the movie camera, turn iton again.≥In the following cases, the power may not turnoff even when set [POWER SAVE] >>[5 MINUTES].≥When connecting to the AC outlet(When using the AC adaptor)≥When connecting the USB cable or the DVcable to a personal computer or otherequipment≥When in PC Connection ModeMenus related to playbackª [REC DATA]Set to [ON] and the settings (shutter speed, iris/gain values, and white balance settings (-110-),etc.) used during the recordings are displayedduring playback.≥If the [AUTO/MANUAL/FOCUS] switch was setto [AUTO] when recording, [AUTO] appears onthe display.≥When there is no data, [---] appears on the display.≥If data recorded on this unit is played back onother equipment (or a tape recorded on otherequipment is played back on this unit), thesettings information is sometimes not displayednormally.ª [AUDIO OUT]This switches the sound to be played back.[STEREO]: Stereo sound (main sound and subsound)[L]: Left channel sound (main sound)[R]: Right channel sound (sub sound)Other menusª [INITIAL SET]When there is a menu that cannot be selecteddepending on a combination of functions, set to[YES] for changing the menu settings back to theinitial shipping condition.(Language setting cannot be back to the initialshipping condition.)ª [DEMO MODE]If you set to [DEMO MODE] >> [ON] withoutinserting a cassette and a card, the movie camerais automatically set to the demonstration mode forintroducing its functions. If any button is pressedor operated, the demonstration mode iscancelled. If no operations take place for approx.10 minutes, the demonstration modeautomatically starts. To terminate thedemonstration mode, insert a cassette or a card,or set to [DEMO MODE] >> [OFF]. For normaluse, set this function to [OFF].