Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

Panasonic NV-GS320 Operating Instructions Manual Manual pdf 111 page image

Record mode111VQT1A48≥When the camera is turned on with the lens capfitted, the automatic white balance adjustmentmay not function properly. Please turn thecamera on after removing the lens cap.≥When setting both the white balance and theiris/gain, set the white balance first.≥Whenever recording conditions change, re-setthe white balance for correct adjustment.ª To set the white balance manuallySelect [ ] in Step 3. Then, while viewing a whitesubject on the entire screen, move the joystick upto select the [ ] indication.ª About flashing of the [ ] indicationWhen the manual adjustment mode isselected≥Flashing indicates that the white balancepreviously adjusted is stored. This setting isstored until the white balance is adjusted again.When white balance cannot be set in themanual adjustment mode≥White balance may not be adjusted properly inthe manual adjustment mode in dark places. Ifso, use the auto white balance mode.During setting in the manual adjustment mode≥When the setting is completed, it will keep lit.ª About the white balance sensorThe white balance sensor detects the type of lightsource during recording.≥Do not cover the white balance sensor duringrecording, or it may not function properly.ª About the black balance adjustmentThis is one of the 3CCD system functions thatautomatically adjusts the black when the whitebalance is set in the manual adjustment mode.When the black balance is being adjusted, thescreen will temporarily be black. (It is not possibleto adjust the black sensor manually.)1 Black balance adjustment (Flashes.)2 White balance adjustment (Flashes.)3 Adjustment completed (Lights up.)Manual focus adjustmentIf auto focusing is difficult due to the conditions,then manual focusing is available.≥Set to Tape/Card Recording Mode.1 Set the [AUTO/MANUAL/FOCUS] switch to[MANUAL].2 Set the [AUTO/MANUAL/FOCUS] switch to[FOCUS].≥The [ ] indication and the manual focus[MF] indication is displayed.3 Move the joystick left or right in order toadjust the focus.≥When focused with a wide angle, the subjectmay not be in focus when zoomed in. First,zoom in on the subject, and then focus on it.ª To restore to the automaticadjustmentSet the [AUTO/MANUAL/FOCUS] switch to[AUTO] or [FOCUS].1 23MFMF MNLMNLMFMF MNL