146 Manipulating Clips with Thumbnails: PropertiesThe status display enables a confirmation of the SD memorycard formatted condition, available memory capacity etc.From the thumbnail menu, select PROPERTY DEVICES SD CARD.If the format is compatible with SD standards, the message“SD STANDARD: SUPPORTED” is displayed.If the format is not compatible with SD standards, themessage “SD STANDARD: NOT SUPPORTED” isdisplayed. If this is the case, writing or reading will not besuccessful. Format the card with the unit. For moreinformation on formatting SD memory cards, see [FormattingSD memory cards] (page 141).¡NoteThe indicated remaining memory capacity on the SDmemory card (PROXY REM) can be an index of remainingmemory capacity for the Proxy but may differ from the actualremaining capacity. For SD or SDHC cards with Classindications, the recording time may be reduced significantlycompared with the actual capacity when images of shortrecording time are recorded repeatedly. If the remainingmemory capacity exceeds 999 min, “999 min” is displayed.The remaining capacity is displayed only when set to recordthe Proxy record on the SD memory card. For the settingmethod, refer to the operation manual of the video encodercard (AJ-YAX800G, optional).Attaching the video encoder card (AJ-YAX800G, optional),select PROPERTY DEVICES PROXY from thethumbnail menu.The slot in which the video encoder card is inserted, andversion information is displayed.SD memory card Status DisplayVideo Encoder Card Status Display (optional)
