89Adjustments and Settings for Recording : Selection of video output signalsAdjustments and Settings for RecordingThe unit employs the HD SDI A · B connector and the MON OUT connector as connectors for outputting video signals.Change the characters of the signal output from the HD SDIA · B connector using the menu. The character content output from the HD SDI A · Bconnector and MON OUT is the same.The signals output from the HD SDI A · B connector areswitched with the HD SDI A · B switch.However, the switching operation is not acknowledgedduring the recording operation.MEM: During EE, such as recording, video imagestaken by the camera are output. Meanwhile,signals on the P2 card are output duringplayback.CAM: The camera images are output at all times.OFF: No signal is output from the HD SDI A · Bconnector.a. HD SDI A · B switchSelection of video output signalsSettings of signals output from HD SDI A · B connectoraHD SDI A B TCGCHARACTER OUTPUT SELMEMCAMOFFF-RUNSETR-RUNONOFFMEMCAMOFFMON OUTItem Variablerange RemarksOUTPUTITEMMENUONLYTCSTATUSSet the characters to be superimposedon the output signals from the HD SDI A· B connector and MON OUT connector.MENU ONLY:The menu screen issuperimposed only when themenu is accessed. This normallydisplays nothing.TC: Time codes are superimposed.(When the menu is accessed,the menu screen issuperimposed.)STATUS:The characters that are thesame as the characterssuperimposed in the viewfinderscreen are superimposed.(When the menu is accessed,the menu screen issuperimposed.)HD SDI A ·B CHAROFFABBOTHOFF: The characters are notsuperimposed on the HD SDI A ·B connector.A: The characters aresuperimposed on the HD SDI Aconnector.B: The characters aresuperimposed on the HD SDI Bconnector.BOTH: The characters aresuperimposed on the HD SDI Aconnector and the HD SDI Bconnector.
