Panasonic PT-50DL54 Operating Instructions Manual

Also see for HDTV DLP PT-60DL54: Technical guide

Contents

Panasonic PT-50DL54 Operating Instructions Manual Manual pdf 29 page image

ICON M ENUS O PERATION27 zENGLISHCanadian French (cont).Canadian French Ratings DescriptionMain and Split Blocking MessageIf V-Chip is enabled and the program exceeds the ratinglimit set by you, the blocking message will appear and theaudio will be muted. Enter your four-digit secret code if youwish to continue viewing the program. After entering yourcode, all locks and rating blocks are disabled until theProjection Television is turned off or until all settings arereprogrammed.Note: If you enter your four-digit secret code to override ratingblocks, you must reset all rating blocks by eitherreprogramming or turning the Projection Television off.SET UP While the desired sub menu is highlighted, press VOL X toselect or activate feature. IDIOMA/LANGUE - Select to change menu languageto ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS(French). ON MUTE - Activates the onscreen ClosedCaption feature when the MUTE button on the remotecontrol is pressed. To deactivate press MUTE buttonagain. MODE - This television contains a built-in decoderthat displays (Closed Captioned) text across thescreen (white or colored letters on black background).It allows the viewer to read the dialogue of a televisionprogram or other information. The program viewedmust include Closed Captioning for the feature to work.Activate the onscreen Closed Captioning feature byselecting one of the following modes.• OFF - When Closed Caption is not desired.• C1 - For video related information to be displayed, up to4 lines onscreen at a time. (It does not block relevantparts of the picture). Text may be in any language.• C2 to C4 - For other modes of video related information.• T1 to T4 - For program guide and other information to bedisplayed, when available. (Blocks a large portion of thepicture on the television screen).Note: C1 mode is recommended for viewing Closed Captions. ZOOM ADJ. -This feature lets you adjust the size ofthe zoom picture and position it vertically.Note: This feature is only selectable while in Zoom mode.Press the ASPECT button on the remote control forselecting Zoom mode. RGB ADJ.This feature is used to display RGB1 or RGB2 input signalcorrectly on screen.Note: This feature is only selectable while in RGB mode.• V-POSITION - To adjust the display vertical.• H-POSITION - To adjust the display horizontally.• CLOCK PHASE - To correct flickering or bleedingof the contour appearing on the screen whenprojecting a PC signal.• DOT CLOCK - To make minor adjustments of thedot clock frequency. When a RGB signal isprojected, the display area of the computer imagecan be adjusted.E Exempt - Exempt programming.GGeneral - Programming intended foraudience of all ages. Contains no violence, orthe violence content is minimal or is depictedappropriately.8 ans +8+ General - Not recommended for youngchildren. Programming intended for a broadaudience but contains light or occasionalviolence. Adult supervision recommended.13 ans +Programming may not be suitable forchildren under the age of 13 - Contains eithera few violent scenes or one or moresufficiently violent scenes to affect them.Adult supervision strongly suggested.16 ans +Programming may not be suitable forchildren under the age of 16 - Containsfrequent scenes of violence or intenseviolence.18 ans +Programming restricted to adults. Containsconstant violence or scenes of extremeviolence.Main Picture Split FrameNote: To unlock split frame, press button,will be displayed in split frame, then enter four-digitsecret code.SPLIT CTRLPROGRAMRATINGEXCEEDEDACCESS - - - -CODEPROGRAM RATING EXCEEDEDACCESS CODE - - - -SET UPIDIOMA/LANGUEZOOM ADJ.OFFON MUTECCMODECCPRESS MENU FOR MAIN MENUENGLISH NORGB ADJ.OTHER ADJ.CCSET UPIDIOMA/LANGUEZOOM ADJ.OFFON MUTECCMODECCPRESS MENU FOR MAIN MENUENGLISH NORGB ADJ.OTHER ADJ.CCCCSET UPZOOM ADJ.PRESS MENU TO RETURNSIZE 4V-POSITION 0NORMAL SETSET UPRGB ADJ.PRESS MENU TO RETURNV-POSITIONH-POSITIONCLOCK PHASEDOT CLOCK00160