Panasonic PT-EX500U Operating Instructions Manual

Contents

Panasonic PT-EX500U Operating Instructions Manual Manual pdf 22 page image

About Your Projector22 - ENGLISHPreparationRear terminals(1) Remote control signal receiver (Back)The infrared remote receiver is also located in thefront and top.(2) LANConnect the LAN cable.(3) MONITOR OUTThis terminal can be used to output the incominganalog RGB signal from INPUT 1-2 terminals to theother monitor.(4) RGBConnect the computer (or RGB scart) output signal tothis terminal.(5) AUDIO IN 1Connect the audio output (stereo) signal from acomputer or video equipment to INPUT 1 terminals.(6) REMOTE INWhen using the wired remote control, connect thewired remote control to this jack with a remote controlcable (not supplied).(7) HDMIConnect the HDMI signal (including sound signal)from video equipment or the DVI signal from computerto this terminal.(8) DVI-DConnect the computer output digital signal to thisterminal. The HDTV (HDCP compatible) signal canalso be connected.(9) INPUT 2Connect the component or composite video outputsignal from video equipment to VIDEO/G/Y, B/PB andR/PR jacks or connect the computer output signal (5BNC Type [Green, Blue, Red, Horiz. Sync, and Vert.Sync.]) to VIDEO/G/Y, B/Pb, R/PR, SYNC/HD, and VDjacks.(10) S-VIDEOConnect the S-VIDEO output signal from videoequipment to this jack.(11) VIDEOConnect the component or the composite videooutput signal from video equipment to these jacks.(12) AUDIO IN 2Connect the audio output (stereo) signal from 5 BNCINPUT jacks (INPUT 2 jacks).(13) AUDIO IN 3 (L/R)Connect the audio output (stereo) signal from videoequipment connected to INPUT 3 jacks. For amonaural audio signal (a single audio jack), connectit to the L jack.(14) VARIABLE AUDIO OUTThis jack outputs the audio signal to external audioequipment.(15) SERIAL INWhen controlling the projector with RS-232C,connect the control equipment to this connector withthe serial control cable.(16) Security slotThis slot is for a Kensington lock used to deter theftof the projector.* Kensington is a registered trademark of ACCOBrands Corporation.AttentionWhen a LAN cable is directly connected to the projector,zthe network connection must be made indoors.(6)(4)(1) (2) (3) (5) (7) (8)(9) (10) (11) (12) (13) (14) (15) (16)