Panasonic PT-EX500U Operating Instructions Manual

Contents

Panasonic PT-EX500U Operating Instructions Manual Manual pdf 37 page image

Powering ON/OFFENGLISH - 37 Basic OperationComplete peripheral connections (with a1 )computer, VCR, etc.) before turning on theprojector.Connect the projector’s AC power cord into an2 )AC outlet. The indicatorlights red.Press the <3 ) > button on the side control orthe button on the remote control.The indicator lightsgreen and the cooling fans start to operate. Thepreparation display appears on the screen andthe count down starts.After the countdown, the input source that was4 )selected the last time and the lamp power statusicon appear on the screen.If the projector is locked with a PIN code, PINcode input dialog box will appear. Enter the PINcode as instructed on the next page.NoteWhen the [Logo select] function is set to [Off], the logozwill not be shown on the screen (Æpage 63).When [Countdown off] or [Off] is selected in the [Display]zfunction, the preparation display will not be shown on thescreen (Æpage 63).When the [Direct on] function is set to [On], the projectorzwill be turned on automatically by connecting the ACpower cord to an AC outlet.The Lamp replacement icon and the Filter replacementzicon may appear on the screen depending on the usagestate of the projector.When the [Picture in Picture] function is set to Userz1-5, User 1-5, Input source, Lamp power status, Lampreplacement icon and Filter warning icon will appear onthe screen for 10 seconds.Turning On the Projector(2)(3)(3)06The preparation display will disappearafter 30 seconds.Lamp power statusInput sourceInitial displayPreparation display