24 - ENGLISHGetting StartedSetting upProjection methodYou can use the projector with any of the following 4 projection methods. To set the desired method in the projector.J Setting on a desk/floor andprojecting forwardMounting on the ceiling andJprojecting forwardMenu setting*1 Menu setting*1Ceiling OffRear OffCeiling OnRear OffJ Mounting on the ceiling andprojecting from rear(Using translucent screen)Setting on a desk/floor andJprojecting from rear(Using translucent screen)Menu setting*1 Menu setting*1Ceiling OnRear OnCeiling OffRear OnFor details about the menu setting, please refer to the [Screen] menu*1 : [Ceiling] and [Rear]. (Æ page 60)AttentionFor optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light fixtureszor other light is at a minimum. Also draw the curtains, close blinds and turn off light fixtures.Parts for ceiling mount (Optional)You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKE200H: for highceiling, ET-PKE200S: for low ceiling), and the optional projector mount base ET-PKE200B.Use only the ceiling mount brackets specified for this projector.zRefer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.zAttentionTo ensure projector performance and security, installation of the ceiling mount bracket must be carried by yourzdealer or a qualified technician.