ENGLISH - 55 SettingsSelect [Image adjust] from the Main Menu (see“Navigating through the menu” on page 46),then select the item from the sub-menu.Remote Control Side ControlNoteMake sure you selected [Store] after adjusting settings.zSome settings can not be stored if not registered with[Store] function.After you changing the image mode via [Image select]zmenu, each item in [Image adjust] menu will return tofactory default.ContrastPress ▲▼ to select [Contrast].1 )Press the button to display2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )Operation Adjustment AdjustmentrangePress ►. increase the contrast Maximumvalue 63Press ◄. decrease thecontrastMinimumvalue 0BrightnessPress ▲▼ to select [Brightness].1 )Press the button to display2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )Operation Adjustment AdjustmentrangePress ►. increase thebrightnessMaximumvalue 63Press ◄. decrease thebrightnessMinimumvalue 0ColorPress ▲▼ to select [Color].1 )Press the button to display2 )the adjustment dialog box.Press ◄► to adjust the setting value.3 )Operation Adjustment AdjustmentrangePress ►. increase theintensity of the colorMaximumvalue 63Press ◄. decrease theintensity of the colorMinimumvalue 0NoteWhen input video signal to the projector, [Color] will bezavailable.TintPress ▲▼ to select [Tint].1 )Press the button to display2 )the adjustment dialog box.Press ◄► to adjust the tint value to3 )get a proper color balance.Adjustments can be made betweenz 0 and 63.NoteWhen you select [NTSC] or [NTSC4.43] in System menuzunder Video input signal, [Tint] will be available.IrisThis iris function effectively increase the contrastintensity.Press ▲▼ to select [Iris1 ) *].Press the button to display2 )the adjustment dialog box.Press ◄► to select the desired items.3 )Off DisabledOn Contrast is prioritized overbrightness.* It is only for EZ570 series, EW630 series and EX600series.Image adjust