Basic operations by using the remote controlENGLISH - 45 Basic OperationUsing the KEYSTONE buttonThis function allows you to correct keystone distortion.buttonFor EW530 series and EX500Jseries.Press the button on the remotecontrol. The Keystone dialog box appears. Press▲▼ to correct keystone distortion. The keystoneadjustment can be stored (Æpage 60).Operation Screen imageReduce theupper widthwith press▲.Reduce thelower widthwith press▼.For EZ570 series, EW630 seriesJand EX600 series.Press the button on the remote controlto switch the [Standard] (for Vertical/Horizontal) /[Corner correction] adjustment. The [Standard] or[Corner correction] adjustment dialog box appears.Press ▲▼◄► to correct the Standard or Cornerdistortion. The [Standard] or [Corner correction]adjustment can be stored. (Æpage 60)StandardJCorner correctionJPress the button on the remote controlto switch [Corner correction] adjustment, press the button on the remote control to select thecorner you want to adjust.The top left corner adjustment as an example:NoteThe white arrows indicate that there is no correction.zA red arrow indicates the direction of correction.zAn arrow disappears at the maximum correction.zIf you press and hold the button forz3 seconds or more , the keystone adjustment will becanceled (Æpage 60).The adjustable range is limited depending on the inputzsignal.[Standard] and [Corner correction] functions cannotzbe adjusted at the same time. If one of the functionsis adjusted, and then the other one will be resetautomatically.Reduce the lower widthwith press ▼.Reduce the upper widthwith press ▲.Reduce the right partwith press ►.Reduce the left partwith press ◄.Press ►Press ▼Reduce the topleft corner partwith press ►▼.Reduce the topright corner partwith press ◄▼.Reduce the bottomleft corner part withpress ►▲.Reduce the bottomright corner partwith press ◄▲.Press thebuttonPress thebuttonPress thebuttonPress thebutton
