Panasonic PT-EZ570UL Operating Instructions Manual

button onzthe remote control for more than 3 seconds todisplay [Picture in Picture] menu.Press the button to access2 )the submenu.Only the sound from the source of Main picturezis valid, while the source of Sub picture cannotoutput the sound.*(Only for EZ570 series, EW630 series and EW530series.)User settingJShow the selected mode ([Off/User 1-5]) and its status([Stored /Free/ Adj.]). [User 1] and [User 2] havestored default values.P in P/P by PJP IN P Provide the images of Main pictureand Sub picture at the ratio ofScreen aspect in the Screen Menu.P by P Provide the images of Main pictureand Sub picture at the ratio of 4:3.NoteIn [P in P] the larger picture is main picture, and thezsmaller one is sub picture; in [P by P], the left picture ismain picture, and the right one is sub picture.Main picture/ Sub pictureJPress ▲▼◄► to adjust the display1 )position of active frame indicated inwhite.The frame will disappear after 10 seconds orzwhen the button is pressed.Input Select an input from Input 1-3.Source Select an input source.Size Select the display size.Position Press the button atPosition and the display positionsetting screen appears.Selecting the Main picture or the Sub picturezDuring Picture in Picture mode, and beingundisplayed On Screen Menu, press the button to select Main or Sub picture. (A red framewill be displayed on the selected picture.)Switching Input and SourcezWhen selecting Main picture or Sub picture, inputand source can be set by pressing the button on the side control or INPUT 1/2/3 buttonon the remote control. Operation on the On ScreenMenu is not necessary.Frame lockJSet the Frame Lock to Main picture or Sub picture.ResetJPress the button at [Reset] to display aconfirmation box. To reset, press the buttonat [Yes].Mode freeJDelete the data stored in the Mode and return to [Free].Use the ▲▼ buttons to select [Mode free] and pressthe button to show the [Where to free?]dialog box. Move the highlight to one of the mode([User 1 - 5]) which you want to delete and press the button. Then the confirmation box appears.To delete, select [Yes].StoreJStore the adjusted data in the [User 1-5]. Use the▲▼ buttons to select [Store] and press the button to show the [Where to store?] dialog box. Movethe highlight to one of the mode (User 1 - 5) whichyou want to store and press the button.Then the confirmation box appears. To store adjusteddata, select [Yes].NoteThe [Picture in Picture] function is not availablezdepending on the input signals and the selected inputterminals.When the input signal(s) is/are incompatible,z X mark willbe displayed on the Main/Sub picture.