ENGLISH -63SettingsSettingSelect [Setting] from the Main Menu (see“Navigating through the menu” on page 47),then select the item from the sub-menu.Remote ControlSide ControlLanguagePress ▲▼ to select [Language].1)Press ► or the button.2)Press ▲▼ to select the desired3)language.For example: PT-EZ570UThe language used in the On-Screen Menu iszavailable in English, German, French, Italian,Spanish, Portuguese, Russian, Chinese, Korean,and Japanese.Menu/Menu position[Menu] function is only for EZ570 series.[Menu position] function is only for EW630 series,EW530 series, EX600 series and EX500 series.PositionJThis function is used to change the position of the On-Screen Menu.Press ▲▼ to select [Position].1)Press the button to change2)the position.The Position changes each time you pressz button as follows:the center→the bottom left→the bottom right→thetop left→the top right→the center.......Menu sizeJ*1This function is used to change the display size of theOn-Screen Menu.Press ▲▼ to select [Menu size] and1)press the button.Press ▲▼ to switch the [Menu size]2)function between [Normal] and[Double].NormalDisplay the On-Screen Menu on thescreen in its normal size.DoubleDisplay the On-Screen Menu on thescreen in its double normal size.This function is only for EZ570 series*1:.Input buttonThis function detects the input signal automatically.When a signal is found, the search will stop.Press ▲▼ to select [Input button].1)Press the button.2)Press ▲▼ to select these functions as3)follows:Mode 1Input search will not work*1Mode 2Input search works*2Mode 3Input search works*3Input search will not work.*1:Input search works under the following situation:*2:●When pressing the button on the remotecontrol or on the side control.Input search works under the following situation:*3:● When turning on the projector by pressing the button on the remote controlor the<> button on the side control.●●●●●● When pressing the button on the remotecontrol or the side control.● When no signal is detected.
