Setting70- ENGLISHSettingsPress ▲▼ to select the desired items1)as below.Permit the shutter operation fromboth the remote control and theprojector's side control.Prohibit the shutter operationfrom the remote control.Prohibit the shutter operationfrom the side control.Prohibit the shutter operationfrom both the remote control andthe projector's side control.Release keyJBy using the Release key function from the followingoptions, the Shutter can be released when it staysactivated.AnyBy pressing any button on theprojector's side control or theremote control, the shutter canbe released when it is closed,and meanwhile the function ofthe selected item will come intoeffect.ShutterOnly by pressing the button on theprojector’s side control or theremote control the shutter can bereleased when it is closed.*1In addition, when the [Shutter] is functioning,*1:only the following buttons are active: button and <z> button on theprojector’s side control. buttons and button onzthe remote control.ManagementJThe Shutter Management function turns off theprojection lamp when the projector is left with theshutter closed and the set time has passed away.The count-down time can be set between 5 and 480minutes. When the count-down time has elapsed, theshutter will be opened up automatically and the lampwill be turned off to cool itself down. The indicator is blinking blue during this cooling-off period.When the lamp has been fully cooled down, the indicator turns green lightingand the indicator keeps blinking. Shouldthe <> button be pressed in this condition, theprojection lamp will be turned on and the indicator turns off.Closed caption[Only for NTSC, 480i input]Press ▲▼ to select [Closed caption].1)Press ► or the button to2)enter the submenu.Closed captionJPress ▲▼ to select [Closed caption]1)and then press the button.Press ▲▼ to select [Off], [CC1], [CC2],2)[CC3] or [CC4].ColorJPress ▲▼ to select [Color] and then1)press the button.Press▲▼ to select color or white.2)NoteThe closed caption is mainly used in the north America.zThis function shows the text information contained in theimage signal. Captions may not be displayed on somedevices or software.You can select [Closed caption] when [NTSC] or [480i]zsignals are input.Part of characters may not displayed when highzcompensation values are set in [Keystone].Closed captions are not displayed while the menu screenzappears.Video delay controlThis function allows you to make a digital processingof a projected image faster.Press ▲▼ to select [Video delay1)control] and then press the button.Press ▲▼ to select one item between2)[Off], [Low], [Mid] and [High]*.* When this function is for these models (EW530series and EX500 series), it only can switchbetween [On] and [Off].Note[Noise reduction] and [Progressive] cannot be selectedzwhen [Video delay control] function is set to [On].The following functions are not available respectivelyzwhen [Video delay control] is set to [Low]/[Mid]/[High].Low ...[Keystone] cannot be selected.Mid ...[Progressive] and [Noise reduction] cannot beselected.High ..[Keystone], [Progressive] and [Noise reduction]cannotbe selected.When [Video delay control] function is set to [Low] orz[High] and press the button on the remotecontrol, [Video delay :On] will be displayed on the bottomleft screen.
