SettingENGLISH - 71 SettingsFilter counterThis function is used to set a frequency for the filterreplacement.Press ▲▼ to select [Filter counter].1 )Press ► or the button to2 )access the submenu items.Filter counterJShow the total accumulated time of the filter use timersetting.Filter counter remainingJThe remaining time for the filter counter is displayedin units of 10%.This is displayed in red when the remaining time is 10%.zFilter counter timerJTo set a timer. When the projector reaches theselected time the filter warning icon appears on thescreen.Press ▲▼ to select [Filter counter1 )timer] and then press the button.Press ▲▼ to set the timer.2 ) Select from [Off/1000H/2000H/3000H/z4 000H/6000H/8000H/9000H/12000H]depending on the use environment.The situation which different icons appear aszbelow shown:When the remaining time is lessthan 10%.When the remaining time is 0, thefilter replacement is necessary.When the projector reachesa time set by user in the timersetting.Filter counter resetJAfter replacing the filter, be sure to reset the timer.Press ▲▼ to select [Filter counter1 )reset].Press the button.2 ) [Filter counter Reset?] appears. Select [Yes]zto continue. Another confirmation dialogbox appears, select [Yes] to reset the [Filtercounter].Test patternResults of adjustment of the position , size and otherfactors are not reflected in test patterns. Ensure theinput signal is displayed before performing variouskinds of setting.Press ▲▼ to select [Test pattern].1 )Press ► or the button to2 )access the submenu items.Press ▲▼ to go backwards and3 )forwards between test patterns asbelow.[Color], [Gradation 1], [Gradation 2],z[Gradation 3], [Gradation 4], [All white], [Allblack] and [Cross].NoteEven while the test pattern is displayed, the zoom,zfocus, lens shift, shutter, and power off functionstake priority.Factory defaultThis function returns all setting values except for [PINcode lock], [Logo PIN code lock] and [Filter counter]to the factory default settings.Press ▲▼ to select [Factory default].1 )Press the button.2 ) [Return to Factory default?] appears. Selectz[Yes] to continue. Another confirmation dialogbox appears, select [Yes] to return to [Factorydefault].
