46 - ENGLISHUsing the screen adjustment functionYou can correct the trapezoidal distortion and the curved distortion of the projected image.buttonFor PT-LW375, PT-LW335, PT-LB425, PT-LB385 and PT-LB3551) Press the button on the remote control.f The selection screen of screen adjustment function is displayed.f You can also press the button on the control panel.[H/V Keystone] Select when the trapezoid of the projected image is distorted.[Corner correction] Select when the four corners of the projected image are distorted.[Curved correction] Select when the linearity is not uniform or the projected image is curved distortion.[Reset value] Return all adjusted values of the screen adjustment function to the factory default values.2) Press as to select [H/V Keystone], [Corner correction], or [Curved correction].3) Press the button.f The individual adjustment screen of the selected item is displayed.4) Press asqw to adjust.For PT-LB3051) Press the button on the remote control.f The [V Keystone] screen is displayed.2) Press as to adjust.f When the [V Keystone] screen is displayed press the button again, the corrected value will becanceled.Notef For more details, refer to the [Expand] menu → [Keystone] (x page 66).f Press the button on the control panel or on the remote control when the [H/V Keystone], [Cornercorrection] or [Curved correction] individual adjustment screen is displaying, the individual adjustment screen will switchas follows.- [H/V Keystone] [Corner correction] (Upper left) [Corner correction] (Upper right) [Corner correction] (Lower right) [Corner correction] (Lower left) [Curved correction X/Y Gain] [Curved correction X Offset] [Curved correction YOffset] [H/V Keystone] ...Using the status functionDisplay the status of the projector.button1) Press the button on the remote control.f The [Info.] screen is displayed.2) Press the button again.f The [Info.] screen disappears.Notef For more details, refer to the [Info.] menu (x page 80).Chapter 3 Basic Operations - Basic operations by using the remote control
