58 - ENGLISH[Color adjust] menuOn the menu screen, select [Color adjust] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 51) for the operation of the menu screen.[Image mode]You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.1) Press as to select [Image mode].2) Press the button.3) Press as to switch the item.f The items will switch each time you press the button.[Dynamic] The light output is maximized for use in bright areas.[Standard] The picture becomes suitable for moving images in general.[Cinema] The picture becomes suitable for movie sources.[Blackboard(Green)] The picture becomes suitable for projecting on a black board (green board) such as classroom.[Colorboard]The picture becomes suitable for projecting on a color board. To select [Colorboard], press the button, the [Colorboard] screen is displayed. To select [Red], [Blue], [Green] or[Yellow], and press the button.[User image]Select this item if manual adjustment of the image is needed.If [User image] is selected, [Contrast], [Brightness], [Color], [Tint], [Color temp.], [Red], [Green],[Blue] or [Sharpness] can be adjusted manually. The adjusted values will be saved as the settingvalues of [User image].4) Press the button.Notef Under an image mode other than [User image], if the items such as [Contrast] and [Brightness] are adjusted, [Image mode]will automatically switch to [User image] and the adjusted values will be saved as the setting values of [User image]. Notethat the original setting values will be discarded if [User image] is selected.[Contrast]You can adjust the contrast of the colors.1) Press as to select [Contrast].2) Press the button.3) Press as to adjust the level.Operation Adjustment Adjustment rangePress the a button. Brightens the screen and makes the color deeper. 0 ~ +63Press the s button. Darkens the screen and makes the color lighter.Attentionf Adjust [Brightness] first when you need to adjust [Brightness] and [Contrast].[Brightness]You can adjust the dark (black) part of the projected image.1) Press as to select [Brightness].2) Press the button.3) Press as to adjust the level.Operation Adjustment Adjustment rangePress the a button. Increases the brightness of the dark (black) parts of the screen. 0 ~ +63Press the s button. Reduces the brightness of the dark (black) parts of the screen.Chapter 4 Settings - [Color adjust] menu
