|
ENGLISH - 55[Display] menuOn the menu screen, select [Display] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 51) for the operation of the menu screen.[Auto PC adj.](Only for still image signals input)When the still image analog RGB signal is input, the image may flicker or shift up, down, left or right. In such a case, press the button to automatically adjust [Fine sync], [H Position], [V Position] and [H.Size] to an optimal state. Performthis function to achieve an optimal state that matches the image.1) Press as to select [Auto PC adj.].2) Press the button.f [Please wait] screen is displayed, the Auto PC adj. function will be executed.Notef The projector executes the Auto PC adj. automatically when detecting image signals that are input to the projector for thefirst time.f Automatic adjustment may not work depending on the model of the computer and the input signal.f The [Auto PC adj.] cannot be operated when 720 x 480i, 720 x 576i, 720 x 480p, 720 x 576p, 1280 x 720p, 1920 x 1080i or1920 x 1080p is displayed in the [Display] menu → [System], or when the digital signal is input.[Fine sync](Only for still image signals input)You can adjust the clock phase to achieve an optimal image when there is a flickering image or smeared outlines.1) Press as to select [Fine sync].2) Press the button.3) Press as to adjust the level.f The adjustment values are 0 to +31. Adjust so that the amount of interference is at a minimum.Notef Certain signals may not be adjustable.f Optimal value may not be achieved if the output from the input computer is unstable.f To project a signal with dot clock frequency with 162 MHz or higher, noise may not disappear even if [Fine sync] is adjusted.f [Fine sync] cannot be adjusted when a digital signal is input.[H Position](Only for still image signals input)Adjust the image position if the image projected on the screen is shifted left or right even when the positions of the projectorand screen are correct.1) Press as to select [H Position].2) Press the button.3) Press as to adjust the horizontal image position.Orientation Operation AdjustmentHorizontal (left andright) adjustment.Press the a button. The image position moves to the right.Press the s button. The image position moves to the left.Notef [H Position] is not available while the image is expanded in the digital zoom function.Chapter 4 Settings - [Display] menu
|
