ENGLISH - 83Displaying the Memory Viewer screen1)Press the button on the remote control to switch theinput source to Memory Viewer.fYou can also press the button on the control panel and select the input source in the Input menu.2)Attach the USB memory directly into the terminal.fThe standby screen “please press RC ENTER” is displayed while the USB memory icon is displayed at the lower left ofthe screen.3)Press the button on the remote control.fThe root directory of the USB memory will be displayed in thumbnail on the screen.Playing the pictures1)Pressasqwon the remote control to select a file you want to play on the memory viewer screen.2)Press the button on the remote control.fThe picture will display on the full screen.3)Presswto switch to the next picture, pressqto return to the previous picture.4)Press the button on the remote control.fReturn to the thumbnail screen.NotefWhen the recorded number of pixels is smaller than the maximum number of display dot*1, it will be displayed enlargedmaintaining the aspect ratio.fWhen the recorded number of pixels is larger than the maximum number of display dot*1, it will be displayed reducedmaintaining the aspect ratio.fWhen the recorded number of pixels is the same as the maximum number of display dot*1, it will neither be enlarged norreduced, so degradation of image quality can be reduced.*1The maximum number of display dot for each product is as follows.PT-LW375 and PT-LW335: 1 280 x 800PT-LB425, PT-LB385 and PT-LB355: 1 024 x 768Executing the slideAll pictures in the same folder will play automatically according to the settings of [Sort order], [Slide transition effect] and so onof the [Memory Viewer] menu.1)Pressasqwon the remote control to select a file.2)Press the →[Set slide].3)Press the button on the remote control.fThe slideshow will start.fPress the button to return to the thumbnail screen.NotefIf you press the playing will continue when the menu disappears.fWhen the slide show is playing the files in the second or subsequent thumbnail pages, if the settings of the [Memory viewer]menu are changed, the slide show will resume from the first file in the first thumbnail page.Termination of the Memory Viewer1)Pressasqwto select the thumbnailwhich is displayed on the upper left corner.2)Press the button on the remote control.fReturn to the standby screen “please press RC ENTER”.Depending on file path length, you may need to repeat Step1)and Step2)before returning to the standby screen.NotefYou can also exit the Memory Viewer by switching to the input other than Memory Viewer.Chapter 5Operation of Function - About Memory Viewer function
