27 ENGLISHReturning to the previouspage• Pressing the MENU button returns the screen tothe previous menu page.• When the MAIN MENU is on the screen, pressingthe MENU button clears all menus from thescreen.Menu items shown inblack characters• Some menu items may not be valid for certainsignal formats applied to the projector.The menu items that cannot be adjusted or usedare shown in black characters, and they cannot beselected.Menu items setting• The bottom prompt line differs on each menudepending on the selected menu option:• A prompt “ CHANGE” appears whenchanging the setting.• A prompt “ ADJUST ” appears for aseparate bar graph.Resetting to the factorydefaultDEFAULT button is used to reset all of the projectoradjustment values to the default levels which wereset at the time of shipment from the factory.PICTUREPICTURE MODECONTRASTBRIGHTNESSCOLOR TEMPWHITE GAINSYSTEM DAYLIGHT VIEWSHARPNESSNOISE REDUCTIONSYSTEM SELECTORAIADJUSTMENU SELECTSTANDARD00COLORTINT00+6+6DEFAULTOFF1ONAUTOBasic menu operationsPress the MENU button.The MAIN MENU appears on the screen.Select (highlight) the desired item withthe or button.Selected items are displayed in yellow.Press the ENTER button to enter yourselection.The submenu for the selected option will now open.(e.g. : POSITION Menu)Highlight the desired adjustment itemwith the or buttons, then changethe parameter value with the orbuttons.(Example of separate adjustment screen)• If no button is operated for approx. 5 secondswhile a bar graph is displayed, the screen willreturn to the previous page.MAIN MENUPICTUREPOSITIONADVANCED MENUDISPLAY LANGUAGEOPTION1OPTION2TEST PATTERNNETWORKSECURITYSUB MENUMENU SELECTPOSITIONSHIFTASPECTZOOMCLOCK PHASEKEYSTONEMENU SELECT4:3+16SUB MENUCLOCK PHASE +16MAIN MENUPICTUREPOSITIONADVANCED MENUDISPLAY LANGUAGEOPTION1OPTION2TEST PATTERNNETWORKSECURITYSUB MENUMENU SELECT