Panasonic PT PT-DW5100EL Operating Instructions Manual

Also see for PT-D5700E: Information sheet Service manual Service manual

Contents

Panasonic PT PT-DW5100EL Operating Instructions Manual Manual pdf 32 page image

32How to use ADVANCED MENUChanging the display languageRASTER POSITIONWhen the whole area where the input picture canbe displayed is not used, the picture can be movedto any position inside the display area.: These adjust the value in the horizontaldirection.: These adjust the value in the verticaldirection.XGA MODEThis mode takes effect only when XGA (RGB)signals are input.XGA : This is the standard setting.WXGA : Select this mode when WXGA signalsare input.SXGA MODEThis mode takes effect only when SXGA (RGB)signals are input.SXGA : This is the standard setting.SXGA+: Select this when the screen is cut off.DISPLAY LANGUAGEENGLISHDEUTSCHFRANÇAISESPAÑOLITALIANOSELECTSETMenus, setting items, adjustment screens, andcontrol button names will be displayed in thelanguage the user chooses.The available languages are:ENGLISH, DEUTSCH, FRANÇAIS, ESPAÑOL,ITALIANO, , , , .• The projector’s on-screen display isset to the English language by default.NotePress to select an item, and pressto adjust the setting.Once adjustment is complete, press the MENUbutton to return to “BRIGHT ADJUST”.Press to select the part of“UPPER”, “LOWER”, “RIGHT”, “LEFT”.Use to adjust the width forcorrecting the “BRIGHT INSIDE” setting(0 to 255).Press to select “BRIGHT OUTSIDE”.Press the ENTER button.The “BRIGHT OUTSIDE” adjustment screenwill be displayed.When “INTERLOCKED” is set to “OFF”, individualadjustment of “R”, “G” and “B” will be possible.Press to select an item, and pressto adjust the setting.Projection range Edge blending width (right)BRIGHT adjustment (right)MarkerBRIGHT INSIDE BRIGHT OUTSIDE• The “BRIGHT ADJUST” is a function formaking the brightening of the bright levelin those areas where the picturesoverlap less conspicuous when multi-screens have been configured using“EDGE BLENDING”. The optimal point iswhere, after the “BRIGHT INSIDE” hasbeen adjusted, the compensationamount is the same for the bright levelsin the areas where the pictures overlapand where the pictures do not overlap.If, after the “BRIGHT INSIDE”adjustment, only the vicinity of theborders of the areas where thepictures overlap and where thepictures do not overlap becomesbright, proceed to adjust the top,bottom, left and right widths.Alternatively, if only the vicinity of theborders has darkened as a result ofthe width adjustments, proceed withthe “BRIGHT OUTSIDE” adjustment.• When a rear screen or screen with ahigh gain is used, the joints mayappear to be discontinuous dependingon the viewing position.• When any setting other than “OFF”has been selected for “EDGEBLENDING”, the “AI” is not adjustable.Note