Panasonic PT PT-DW5100EL Operating Instructions Manual

Also see for PT-D5700E: Information sheet Service manual Service manual

Contents

Panasonic PT PT-DW5100EL Operating Instructions Manual Manual pdf 44 page image

44Using Web Browser ControlPeriodic warning interval setting (E-mailis sent on the checked days of theweek/times)Enter the E-mail address of yourdesired recipient.Select the conditions for sending E-mail.ERROR:an error is detected by self-diagnosis.LAMP RUNTIME:remaining lamp service time hasreached the value set in the field.INPUT AIR TEMPERATURE:intake air temperature has reached thevalue set in the field.E-mail set up pageWith this projector, if a problem occurs or if the lamp usage time reaches a set value, an E-mail message can besent to one or more preset E-mail addresses (maximum two addresses). Click [Projector control], then [E-mailset up] to display the E-mail set up page.The user can enter the location of, forexample, the installed projector so thatthe recipient may easily identify theoriginator of the E-mail.(maximum 63 characters)The user can modify the threshold temperature for sendingtemperature warning mail. If the temperature rises above the setvalue, control sends temperature warning mail.The user can modify the minimum timeinterval of temperature warning mail. Thedefault value is 60 minutes. In this case,the user cannot send another mail for 60minutes after sending previoustemperature warning mail even the setwarning temperature is reached again.Enter the IP address or server name of theE-mail server (SMTP). The DNS servermust be set if the server name is entered.Enter the E-mail address of the projector.(maximum 63 characters)Select “Enable” to use the E-mailfunction.