Panasonic PT PT-DW5100EL Operating Instructions Manual

Also see for PT-D5700E: Information sheet Service manual Service manual

Contents

Panasonic PT PT-DW5100EL Operating Instructions Manual Manual pdf 39 page image

39 ENGLISHSetting the network Connecting the PCThe settings required for the network must beestablished in order to use the Web browser (page 40)functions that the PC uses to control the projector.HOST NAME : Make alteration if necessarywhen to use the DHCP server.The number of valid charactersis 1 to 12 characters (spacesnot allowed).DHCP : Set the DHCP item to ON when toacquire an IP address automaticallyusing the DHCP server.Set to OFF if DHCP server isnot used.IP ADDRESS : Enter the IP address if DHCPserver is not used.SUBNET MASK : Enter the subnet mask ifDHCP server is not used.GATEWAY : Enter the gateway address ifDHCP server is not used.NETWORK STATUS: Displays the network statusof the unit such as DHCP orIP ADDRESS.STORE : The settings are stored in thememory.NETWORKHOST NAMEDHCPIP ADDRESSSUBNET MASKGATEWAYNETWORK STATUSSTOREMENU SELECTOFF192.168. 0. 8255.255.255. 0192.168. 0. 1ADJUSTPROJECTOR• Before using the DHCP server, makesure the DHCP server is alreadyfunctioning.• For details of IP address, subnetmask, and gateway, ask the networkadministrator.AttentionSystem requirementsThe following system specifications are required inorder to use the networking functions.• PCOS : Windows XP/2000/Me (MillenniumEdition)/98SE (Second Edition)CPU : Pentium processor or fasterRAM : 64 MB or more (128 MB or more forWindows XP/2000)Web browser: Internet Explorer 6.0 or newer,Netscape Communicator 7.0 ornewer• LAN cableType : Category 5 compatible straight cableLength: 100 m or less• If you want to use the E-mail function,make sure the system can handle E-mail.Operation is not guaranteed for allcomputers that meet the aboveconditions.Connection example• Touching the LAN terminal with yourhand (or body) when you are carryinga static charge may damage theequipment due to a discharge of staticelectricity. Therefore, be careful not totouch the LAN terminal or metal partsof the LAN cable.• Please connect the LAN cable toindoor devices.AttentionRGB 2 INVDSYNC/HDB/P BG/YRR/PSERIALREMOTE 1 REMOTE 2 IN IN OUTLANDVI-D INRGB 1 INVIDEO IN S-VIDEO ININ OUTPersonalcomputerHubLAN cable(straight)LAN cable(straight)Projector10BASE-T or 100BASE-TXAttentionReturning the networkfunction setting back tothe factory settingThe user can return all settings of network functionsuch as IP address, password and E-mail setting tothe factory setting.Press to select “STORE”.Hold down the DEFAULT button for 3seconds.A confirmation screen will be displayed.To cancel, press the MENU button. The“NETWORK” screen will be displayed.Press the ENTER button.