Panasonic PT-VZ580 Operating Instructions (functional Manual)

Also see for PT-VW540: Operating instructions Operating instructions

Contents

Notef Set the [PROJECTOR SETUP] menu → [COMPUTER2 SELECT] to [COMPUTER2 IN] when a signal is to be input to the IN/1 OUT> terminal. When [COMPUTER2 SELECT] is set to [COMPUTER1 OUT], it cannot switch to COMPUTER 2 input.f If one of COMPUTER 1 / COMPUTER 2 / HDMI 1 / HDMI 2 input is selected and no signal is input, the following screen is displayed. Checkthe output setting of your computer.Switching the input with the control panelThe input can be switched with the button on the control panelAfter pressing the button, the detailed or simple input guide is displayed.Detailed input guide example Simple input guide example1) Press the button on the control panel.f The input guide is displayed.2) Press the button again.f Every time you press the button, the inputs are switched in the following order.COMPUTER1 → COMPUTER2 → HDMI1 → HDMI2 → VIDEO → COMPUTER1 → ...f When the detailed input guide is displayed, you can select the input with the qw buttons on the controlpanel or on the remote control.Notef You can switch the detailed/simple input guide by setting the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [INPUT GUIDE].f When the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [INPUT GUIDE] is set to [OFF], the input guide is not displayed.How to adjust the state of the imageIf the projected image or the position is not correct when the positioning of the projector and the screen is correctly installed,adjust the projection angle, zoom, focus and vertical shift.Focus leverFig. 2Zoom leverVertical lens shift dialFig. 142 - ENGLISHChapter 3 Basic Operations - Projecting