Panasonic PT-VZ580 Operating Instructions (functional Manual)

Also see for PT-VW540: Operating instructions Operating instructions

Contents

[POSITION] menuOn the menu screen, select [POSITION] from the main menu, and select an item from the submenu.Refer to “Navigating through the menu” (Æ page 50) for the operation of the menu screen.[REALTIME KEYSTONE]The projector can correct the vertical trapezoidal distortion automatically when the projector is installed tilted.1) Press as to select [REALTIME KEYSTONE].2) Press qw or the button.f The [REALTIME KEYSTONE] individual adjustment screen is displayed.3) Press qw to switch the item.[ON] Enables the automatic realtime keystone correction.[OFF] Disables the automatic realtime keystone correction.Notef Depending on the installation situation, the trapezoidal distortion may not be able to fully corrected. In this case, perform the adjustment inthe [POSITION] menu → [SCREEN ADJUSTMENT].f [REALTIME KEYSTONE] cannot be set when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to [FRONT/CEILING] or[REAR/CEILING].[SCREEN ADJUSTMENT]Correct the distortion when the projector is installed as tilted or the screen is tilted or curved.1) Press as to select [SCREEN ADJUSTMENT].2) Press the button.f The [SCREEN ADJUSTMENT] screen is displayed.3) Press as to select one item to adjust.[KEYSTONE] Adjusts when the projected image is distorted as trapezoid.[CORNER CORRECTION] Adjusts when the four corners of the projected image are distorted.[CURVED CORRECTION] Adjusts when the projected image is curved distortion.4) Press the button.f The [KEYSTONE] screen, [CORNER CORRECTION] screen or the [CURVED CORRECTION] screen isdisplayed.Notef Only one item of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] can be enabled. If you perform the setting of[KEYSTONE], [CORNER CORRECTION] or [CURVED CORRECTION] and then perform the setting of the other items, the value of theprevious items will be reset.f The image quality will deteriorate as the correction amount of [SCREEN ADJUSTMENT] increases, making focusing difficult. Install theprojector so that the correction amount is as small as possible.f When adjustments are performed with [SCREEN ADJUSTMENT], the image size also changes.Setting [KEYSTONE]1) Press as to select [SCREEN ADJUSTMENT].2) Press the button.f The [SCREEN ADJUSTMENT] screen is displayed.3) Press as to select [KEYSTONE].4) Press the button.f The [KEYSTONE] screen is displayed.ENGLISH - 59Chapter 4 Settings - [POSITION] menu