[GAMMA]You can adjust contrast balance.1) Press as to select [GAMMA].2) Press qw or the button.f The [GAMMA] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Adjustment rangePress the w button. The midtones become brighter. -8 ~ +7Press the q button. The midtones become darker.[IRIS]By automatically adjusting the aperture according to the image, it makes an image of optimum contrast.1) Press as to select [IRIS].2) Press qw or the button.f The [IRIS] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] No aperture correction.[ON] Corrects the aperture.[DAYLIGHT VIEW]You can correct the image to the optimal vividness even if it is projected under a bright light.1) Press as to select [DAYLIGHT VIEW].2) Press qw or the button.f The [DAYLIGHT VIEW] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[ON] Corrects the vividness of the image.[OFF] No correction.[AUTO] Detects the brightness of the installation environment with the luminance sensor, and automaticallycorrects the vividness of the image.Notef [DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to [REAR/DESK] or[REAR/CEILING].f The luminance may not be detected correctly when an object is placed on top of the projector, blocking the luminance sensor. In such acase, this function may not operate properly even if it is set to [AUTO].[DIGITAL CINEMA REALITY]When inputting the following signals, it performs cinema processing to improve the vertical resolution and theimage quality.480/60i, 576/50i, 1080/60i, 1080/50i signals and VIDEO signal1) Press as to select [DIGITAL CINEMA REALITY].2) Press qw or the button.f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.56 - ENGLISHChapter 4 Settings - [PICTURE] menu
