Web control functionUsing Web control functions, you can perform the following operations from a computer.f Setting and adjustment of the projectorf Displaying projector statusf Sending E-mail messages when there is a problem with the projectorThe projector supports “Crestron ConnectedTM”, and the following application software of Crestron Electronics,Inc. can be used.f RoomView Expressf Fusion RVf RoomView Server EditionNotef Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.f “Crestron ConnectedTM” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systemsconnected to a network using a computer.f For details of “Crestron ConnectedTM”, refer to the website of Crestron Electronics, Inc. (English only)URL http://www.crestron.comTo download “RoomView Express”, go to the website of Crestron Electronics, Inc. (English only)URL http://www.crestron.com/getroomviewComputer that can be used for settingA web browser is required to use the web control function. Confirm that your web browser can be usedbeforehand.OS Compatible web browserWindows Internet Explorer 11.0Mac OS Safari 8.0/9.0/10.0Notef You cannot operate the [Crestron Connected (TM)] page when using Microsoft Edge. Clicking the [Crestron Connected (TM)] button willfreeze the web browser.Accessing from the web browser1) Start up the web browser on the computer.2) Enter the IP address set on the projector into the URL entry field of the web browser.3) Enter the user name and the password.f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and thepassword is panasonic (single-byte characters in lower case).ENGLISH - 91Chapter 5 Operation of Function - Web control function
