Panasonic PT-VZ580 Operating Instructions (functional Manual)

Also see for PT-VW540: Operating instructions Operating instructions

Contents

CAUTION: POWERWhen disconnecting the power cord, be sure to hold the power plug and power connector.If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electricshocks will result.When not using the projector for an extended period of time, disconnect the power plug from the walloutlet.Failure to do so may result in fire or electric shock.Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.Failure to do so may result in electric shock. ON USE/INSTALLATIONDo not place heavy objects on top of the projector.Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage orinjury. The projector will be damaged or deformed.Do not put your weight on this projector.You could fall or the projector could break, and injury will result.z Be especially careful not to let young children stand or sit on the projector.Do not place the projector in extremely hot locations.Doing so will cause the outer casing or internal components to deteriorate, or result in fire.z Take particular care in locations exposed to direct sunlight or near stoves.Do not install the projector in a location where salt pollution or corrosive gas may occur.z Doing so may result in falling due to corrosion. Also, it may result in malfunctions.Do not stand in front of the lens while the projector is being used.Doing so can cause damage and burns to clothing.z Strong light is emitted from the projector’s lens.Do not place objects in front of the lens while the projector is being used.Doing so can cause fire, damage to an object, or malfunction of the projector.z Strong light is emitted from the projector’s lens.Always disconnect all cables before moving the projector.Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks tooccur.When mounting the projector on the ceiling, keep mounting screws and power cord from contact withmetal parts inside the ceiling.Contact with metal parts inside the ceiling can cause electric shocks.Never plug headphones and earphones into terminal.Excessive sound pressure from earphones and headphones can cause hearing loss.Do not project an image with the lens cap attached.Doing so can cause fire.WARNING:Lamp replacementThe lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents willresult.z The lamp can easily explode if struck against hard objects or dropped.z Before replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the walloutlet. Electric shocks or explosions can result if this is not done.z When replacing the lamp, turn the power off and allow the lamp it to cool for at least 1 hour before handlingit otherwise it can cause burns.Remove the depleted batteries from the remote control promptly.z Leaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.Read this first!8 - ENGLISH