Panasonic PV-GS250 Operating Instructions Manual

Also see for Digital Palmcorder PV-GS250: Operating instructions

Contents

Panasonic PV-GS250 Operating Instructions Manual Manual pdf 38 page image

Record mode38LSQT0862x To cancel the scene mode functionSet [BASIC] >> [SCENE MODE] >> [OFF] or setthe [AUTO/MANUAL/FOCUS] switch to [AUTO].Sports modepFor slow-motion playback or playback pauseof recorded pictures, this mode helpsdiminish camera shake.pDuring normal playback, the imagemovement may not look smooth.pAvoid recording under fluorescent light,mercury light or sodium light because thecolor and brightness of the playback imagemay change.pIf you record a subject illuminated with stronglight or a highly reflective subject, verticallines of light may appear.pIf the brightness is insufficient, the sportsmode does not function. The [] indicationflashes.pIf this mode is used indoors, the screen mayflicker.Portrait modepIf this mode is used indoors, the screen mayflicker. If so, change the scene mode settingto [OFF].Low light modepExtremely dark scenes may not be able to berecorded finely.Spotlight modepIf the recording subject is extremely bright,the recorded image may become whitish andthe periphery of the recorded imageextremely dark.Surf & snow modepIf the subject is extremely bright, the recordedimage may become whitish.Recording in natural colors(White balance)The automatic white balance function may notreproduce natural colors depending on the sceneor lighting conditions. If so, you can adjust thewhite balance manually.pSet to Tape/Card Recording Mode.1 Set the [AUTO/MANUAL/FOCUS] switch to[MANUAL].2 Move the joystick down until the whitebalance indication appears. ([ ] etc.)3 Move the joystick left or right in order toselect the white balance mode.1) Auto white balance adjustment [ ]2) Indoor mode (for recording underincandescent lamps) [ ]3) Outdoor mode [ ]4) Manual adjustment mode [ ]x To restore to the automaticadjustmentMove the joystick left or right until the [ ]indication appears. Or, set the [AUTO/MANUAL/FOCUS] switch to [AUTO].pWhen the Camcorder is turned on with the lenscap fitted, the automatic white balanceadjustment may not function properly. Pleaseturn the Camcorder on after removing the lenscap.pWhen setting both the white balance and theiris/gain, set the white balance first.pWhenever recording conditions change, re-setthe white balance for correct adjustment.AUTOMANUALFOCUSAWBMNLAWB1 1111)3)2)4)AWBAWBAWB