Panasonic PV-GS250 Operating Instructions Manual

Also see for Digital Palmcorder PV-GS250: Operating instructions

Contents

Panasonic PV-GS250 Operating Instructions Manual Manual pdf 64 page image

Menu64LSQT0862Menus related to taking picturesx [H.SHOE MIC]Set to [LOWCUT] and this reduces low soundnoise and wind noise hitting the stereo zoommicrophone (VW-VMH3; optional) mounted onthe smart accessory shoe.x [DATE/TIME]This switches between date and time indications.pThe Camcorder automatically records the dateand time the picture was taken on the tape.pYou can also show or change the date/timeindication by repeatedly pressing the [DATE/TIME] button on the remote control.x [AUDIO REC]Switches the audio (PCM audio) recordingsystems.[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.(The original audio signals can be keptafter the other audio signals are dubbed.)[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.Audio can be recorded in higher quality.(If audio signals are dubbed, then theoriginal audio signals will be erased.)x [REC LAMP]Set to [ON] and this turns the recording lamp onduring recording, which indicates that recording isunderway. Set to [OFF] and this does not turn onthe lamp even when recording is underway.x [DISPLAY]Set to [ON] and the display mode can be switchedto all functions. Set to [OFF] and it can beswitched to minimum display.x [BEEP SOUND]Set to [ON] and confirmation/alarm beeps areissued as follows.1 BeeppWhen you start recordingpWhen you turn on the power2 BeepspWhen you pause recording2 Beeps for 4 timespWhen a cassette with its erasure prevention tabset to [SAVE] is inserted, condensation occurs,and at other times. Check the sentencedisplayed on the screen.Menus related to playbackx [AV JACK]This switches among the output settings of theAV/headphone terminal.[IN/OUT]: Use this setting when inputting signalsfrom other equipment via an AV cableor a S-Video cable.[OUT/¤]: Automatically switches between AVand headphone output.[OUT]: Use this setting when image or soundis not output normally to the TV in[OUT/¤].pWhen using the headphone, set to [SETUP] or[BASIC] >> [AV JACK] >> [OUT/¤]. If set to[OUT], you may hear noises on the right.x [REC DATA]Set to [ON] and the settings (shutter speed, iris/gain values, and white balance settings (-38-),etc.) used during the recordings are displayedduring playback.pWhen the [AUTO/MANUAL/FOCUS] switch isset to [AUTO], the indication [AUTO] willappear.pWhen there is no data, [---] appears on thedisplay.pIf the Camcorder data of the Camcorder areplayed back on other equipment, the settingsinformation is sometimes not displayednormally.x [AUDIO OUT]This switches the sound to be played back.[STEREO]: Stereo sound (main sound and subsound)[L]: Left channel sound (main sound)[R]: Right channel sound (sub sound)