Edit mode48LSQT0862pThe size of still pictures recorded on a card fromthe external input becomes [640]. (This is notmaga-pixel still-picture recording.)pWhen recording still pictures on a card, youcannot record sound.x Analog/digital conversionWhen setting [ADVANCE] >> [DV OUT] >> [ON],you can output video input from other equipmentin analog form to other digital video equipmentconnected through the DV terminal in digital form.1 Insert the DV cable PV-DDC9/PV-DDC9-K(optional) securely into the DV terminal asfar as it will go.1) Other equipment (Video equipment, etc.)2) Camcorder3) Other digital video equipmentp Analog signalOther equipment (Video equipment, etc.) Camcorderp Digital signalCamcorder Other digital video equipmentpWhen a pause or cue/review playback isactivated on other equipment during analog/digital conversion, the image may be disturbedor no image may be presented.pNormally, set [DV OUT] >> [OFF]. If set to [ON],the image may be disturbed.Using the DV cable for Recording(Digital Dubbing)By connecting other digital video equipment withDV terminal and the Camcorder by using the DVcable PV-DDC9/PV-DDC9-K (optional) ,high-image-quality dubbing can be done in digitalformat.pSet to Tape Playback Mode. (Player/recorder)1 Connect the Camcorder and digital videoequipment with the DV cable.2 Set [ADVANCE] >> [REC STDBY] >> [YES].(Recorder)pYou do not have to follow this step when theremote control is used in the digital dubbing.3 Start playback. (Player)4 Start recording. (Recorder)Move the joystick up to select [q/] icon.Or, while pressing the [qREC] button on theremote control, press the [] button.5 Move the joystick up to select the [q/]icon again or press the [] button on theremote control to stop recording.(Recorder)6 Stop playback. (Player)1)2) 3)DV1DVDVSTOPV/REWSTILL ADV VOL¥REC A.DUBPLAYPAUSEFF/WSTILL ADVTW